Voice Vlan Commands - Panasonic ZEQUO 2200 Operating Instructions Manual

64.Voice VLAN Commands

Voice VLAN is a function to configure a voice-specific VLAN to secure the
bandwidth of voice data when normal communication data and voice data
such as an IP phone coexist on the network. It prevents voice data delay
and maintains the quality at the constant level regardless of the traffic
status on the network.
To use a voice VLAN, you need to pre-register the vendor code (OUI) of an
IP phone connected.
enable voice_vlan [<vlan_name 32> | vlanid <vlanid 1-4094>]
disable voice_vlan
config voice_vlan priority <int 0-7>
config voice_vlan oui [add | delete] <macaddr> <macmask> {description <desc 32>}
config voice_vlan ports [<portlist> | all] [state [enable | disable] | mode [auto{[tag | untag]}
| manual]]
config voice_vlan log state [enable | disable]
config voice_vlan aging_time <min 1-65535>
show voice_vlan
show voice_vlan lldp_med voice_device
show voice_vlan oui
show voice_vlan ports {<portlist>}
show voice_vlan voice_device {ports <portlist>}
Figure 64-1 Voice VLAN overview
613
64. Voice VLAN Commands