Panasonic ZEQUO 2200 Operating Instructions Manual page 532

54. Spanning Tree Protocol (STP) commands
54.7. config stp instance_id
 Description
There are two different action types to deal with an MST instance. They are listed as
follows:
1）add_vlan: To map specified VLAN lists to an existing MST instance.
2）remove_vlan: To delete specified VLAN lists from an existing MST instance.
 Format
config stp instance_id <value 1-64> [add_vlan | remove_vlan] <vidlist>
 Parameters
<value 1-64>
Specify the MSTP instance ID. Instance 0 represents a default instance CIST. The DUT
supports 65 instances (0-64) at most.
add_vlanDefined action type to configure an MST instance.
remove_vlan
Defined action type to configure an MST instance.
<vidlist> Specify the newly added CLI Value Type. It is similar to <portlist> type, but the value range
is 1 to 4094.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To map a VLAN ID to an MSTP instance:
Zxxx0:admin#config stp instance_id 2 add_vlan 1
Command: config stp instance_id 2 add_vlan 1
Success.
Zxxx0:admin#
To remove a VLAN ID from an MSTP instance:
Zxxx0:admin#config stp instance_id 2 remove_vlan 2
Command: config stp instance_id 2 remove_vlan 2
Success.
Zxxx0:admin#
532