Panasonic ZEQUO 2200 Operating Instructions Manual page 198

24. File System Management Commands
To display storage media information:
Zxxx0:admin#show storage_media_info
Command: show storage_media_info
Unit Drive Media Type
---- ----- ----------
1 c: Flash
Zxxx0:admin#
24.2. md
 Description
This command is used to create a directory.
 Format
md {{unit <unit_id>} <drive_id>} <pathname>
 Parameters
unit Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.
<unit_id>
Enter the unit ID value here.
<drive_id>
Specifies the drive ID. If not specified, it refers to the current drive.
<pathname>
Specify the directory to be created. The path name can be specified either as a full path
name or partial name. For a partial path name, it indicates the directory is in the current
directory.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To create a directory:
Zxxx0:admin#md c:/abc
Command: md c:/abc
Success.
Zxxx0:admin#
Size Label
-------- -----------
123 MB
198
FS Type
-------
FFS