Config Stp Priority - Panasonic ZEQUO 2200 Operating Instructions Manual

54. Spanning Tree Protocol (STP) commands

54.12. config stp priority

 Description
One of the parameters used to select the Root Bridge.
 Format
config stp priority <value 0-61440> instance_id <value 0-64>
 Parameters
<value 0-61440>
Specify the bridge priority value, which must be divisible by 4096. The default value is
32768.
instance_id
Specify the identifier value, which is used to distinguish different STP instances.
<value 0-64>
Specify the identifier value, which is used to distinguish different STP instances.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the STP instance ID:
Zxxx0:admin#config stp priority 61440 instance_id 0
Command: config stp priority 61440 instance_id 0
Success.
Zxxx0:admin#
54.13. config stp
 Description
This command is used to configure the bridge parameter global settings.
 Format
config stp {maxage <value 6-40> | maxhops <value 6-40> | hellotime <value 1-2> |
forwarddelay <value 4-30> | txholdcount <value 1-10> | fbpdu [enable | disable]} (1)
536