Panasonic ZEQUO 2200 Operating Instructions Manual page 134

17. Didital Diagnostic Monitoring (DDM) Commands
17.2. config ddm ports voltage_threshold
 Description
The command configures the voltage thresholds of the specified ports. The precision of the
effective threshold is dependent on the hardware.
 Format
config ddm ports [<portlist> | all] voltage_threshold { high_alarm < voltage > |
low_alarm < voltage > igh_warning < voltage >
| low_warning < voltage > } (1)
 Parameters
ports
<portlist>
Specifies a range of ports to be configured. (The portlist format: UnitID: port
number).
' '
all If all parameter is chosen, all optic ports
voltage_threshold
Specifies the threshold of optic module
high_alarm
<voltage>
Specifies the high threshold for the voltage alarm.
When the operating parameter rises above this value, the action associated with
the alarm is taken. The range of this parameter is from 0 to 6.5535 voltages.
low_alarm
<voltage>
Specifies the low threshold for the voltage alarm.
When the operating parameter falls below this value, the action associated with
the alarm is taken. The range of this parameter is from 0 to 6.5535 voltages.
high_warning
<voltage>
Specifies the high threshold for the voltage warning.
When the operating parameter rises above this value, the action associated with
the warning is taken. The range of this parameter is from 0 to 6.5535 voltages.
low_warning
<voltage>
Specifies the low threshold for the voltage warning.
When the operating parameter falls below this value, the action associated with
the warning is taken. The range of this parameter is from 0 to 6.5535 voltages.
'
operating parameters will be configured.
'
s voltage.
134