Panasonic ZEQUO 2200 Operating Instructions Manual page 211

delete permit server_ip
Specify the delete permit server IP address.
<ipaddr>
Specify the IP address.
client_mac
(Optional) Specify the MAC address of the DHCP client.
<macaddr>
Specify the MAC address.
ports Specify the ports.
<portlist>
Specify a range of ports to be configured.
all Specify to configure all ports.
ports Specify the ports.
<portlist> Specify a range of ports to be configured.
all Specify to configure all ports.
state Specify the port status.
enable
Enable the state.
disable
Disable the state.
illegal_server_log_suppress_duration
Specify the illegal server log suppression duration.
1min Specify an illegal server log suppression duration of 1 minute.
5min Specify an illegal server log suppression duration of 5 minutes.
30minSpecify an illegal server log suppression duration of 30 minutes.
trap_log Specify the trap log status.
enable Enable the trap log feature.
disable Disable the trap log feature.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To add an entry from the DHCP server/client filter list in the Switching Hub's
database:
Zxxx0:admin#config filter dhcp_server add permit server_ip 10.1.1.1 client_mac 00-
00-00-00-00-01 port 1-26
Command: config filter dhcp_server add permit server_ip 10.1.1.1 client_mac 00-00-
00-00-00-01 port 1-26
Success.
Zxxx0:admin#
211
25. Filter Commands