Panasonic ZEQUO 2200 Operating Instructions Manual page 185

 Example
To disable the EEE status on port 1-3:
Zxxx0:admin#config eee ports 1-3 state disable
Command: config eee ports 1-3 state disable
Success.
Zxxx0:admin#
22.2. show eee ports
 Description
This command is used to display the EEE settings per ports.
 Format
show eee ports {<portlist>}
 Parameters
<portlist>(Option)Specify a range of ports to be configured.
All port settings are displayed if portlist parameter is not specified.
 Restrictions
None.
 Example
To display the EEE settings on port 1-4:
Zxxx0:admin#show eee ports 1-4
Command: show eee ports 1-4
Port State
--------- -----------
1 Enabled
2 Enabled
3 Enabled
4 Enabled
Zxxx0:admin#
22. Energy Efficient Ethernet (EEE) Commands
185