Panasonic ZEQUO 2200 Operating Instructions Manual page 657

67.8. config 802.1x capability ports
 Description
This command is used to configure port capability.
 Format
config 802.1x capability ports [<portlist> | all] [authenticator | none]
 Parameters
<portlist>
Specify a range of ports to be configured.
all Specify to configure all ports.
authenticator
The port that wishes to enforce authentication before allowing access to services that are
accessible via that port adopts the authenticator role.
none Disable authentication on specified port.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure port capability for ports 1 to 10:
Zxxx0:admin#config 802.1x capability ports 1-10 authenticator
Command: config 802.1x capability ports 1-10 authenticator
Success.
Zxxx0:admin#
67.9. config 802.1x fwd_pdu ports
 Description
This command is used to configure the 802.1X PDU forwarding state on specific ports
of the Switching Hub.
 Format
config 802.1x fwd_pdu ports [<portlist> | all] [enable | disable]
657
67. 802.1X Commands