Panasonic ZEQUO 2200 Operating Instructions Manual page 252

29. IP Source Address Verify Commands
29.3. create ip_source_binding
 Description
This command is used to create an IPSG entry. One MAC address can be mapped to
multiple IP addresses.
 Format
create ip_source_binding ipaddress <ipaddr> mac_address <macaddr> port <port>
 Parameters
ipaddr Specify the IP address used for the IPSG entry.
macaddr Specify the MAC address used for the IPSG entry.
port Specify the port that the entry will apply to.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To create an IPSG entry that binds the IP address 10.1.1.1 to the MAC address 00-00-
00-00-00-11 on port 3:
Zxxx0:admin# create ip_source_binding ipaddress 10.1.1.1 mac_address 00-00-00-00-
00-11 port 3
Command: create ip_source_binding ipaddress 10.1.1.1 mac_address 00-00-00-00-00-11
port 3
Success
Zxxx0:admin#
252