Panasonic ZEQUO 2200 Operating Instructions Manual page 592

63. Utility Commands
unit (Optional) Specifies which unit on the stacking system. If it is not specified, it refers to the
master unit.
<unit_id 1-4>
Enter the unit ID used here.
src_file (Optional) Specify an absolute path name on the device file system. If the path name is
not specified, it refers to the boot up image.
<pathname>
Specify an absolute path name on the device file system. If the path name is not
specified, it refers to the boot up image.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To upload firmware from a file system device to a TFTP server:
Zxxx0:admin#upload firmware_toTFTP 10.1.1.1 dest_file D:\firmware.rom src_file
1.0.0.xx.rom
Command: upload firmware_toTFTP 10.1.1.1 dest_file D:\firmware.rom src_file
1.0.0.xx.rom
Connecting to server.................. Done.
Upload firmware....................... Done.
Zxxx0:admin#
To upload the current configuration file to a TFTP server:
Zxxx0:admin#upload cfg_toTFTP 10.48.74.121 dest_file c:\cfg\Zxxx0.cfg
Command: upload cfg_toTFTP 10.48.74.121 dest_file c:\cfg\Zxxx0.cfg
Connecting to server.................. Done.
Upload configuration.................. Done.
Zxxx0:admin#
To upload all logs to a TFTP server:
Zxxx0:admin#upload log_toTFTP 10.48.74.121 dest_file c:\log\Zxxx0.log
Command: upload log_toTFTP 10.48.74.121 dest_file c:\log\Zxxx0.log
Connecting to server.................. Done.
Upload log............................ Done.
Zxxx0:admin#
To upload a dangerous log:
592