fast_done
Enable or disable the MLD snooping fast leave function. If enabled, the membership is
immediately removed when the system receive the MLD leave message.
enable
Enable the MLD snooping fast leave function.
disable
Disable the MLD snooping fast leave function.
proxy_reporting
Specifies that the proxy reporting function will be configured.
state Specifies the state of the proxy reporting function.
enableSpecifies that the proxy reporting function will be enabled.
disableSpecifies that the proxy reporting function will be disabled.
source_ip
Specifies the source IPv6 address used.
<ipv6addr>
Enter the source IPv6 address used here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure MLD snooping:
Zxxx0:admin#config mld_snooping vlan_name default state enable
Command: config mld_snooping vlan_name default state enable
Success.
Zxxx0:admin#
41.2. config mld_snooping rate_limit
Description
This command is used to configure the upper limit per second for ingress MLD control
packets.
Format
config mld_snooping rate_limit [ports <portlist> | vlanid <vlanid_list>] [<value 1-1000> |
no_limit]
Parameters
ports
Specify a range of ports to be configured.
<portlist>
Specify a range of ports to be configured.
41. MLD Snooping Commands
371