Panasonic ZEQUO 2200 Operating Instructions Manual page 291

Zxxx0:admin#show mcast_filter_profile
Command: show mcast_filter_profile
Profile ID Name
---------- --------------------------- -----------------------------
1 MOD
2 customer
Total Entries: 2
Zxxx0:admin#
34.6. config limited_multicast_addr
 Description
This command is used to configure the multicast address filtering function on a port
or VLAN. When there are no profiles specified with a port or VLAN, the limited
function is not effective. When the function is configured on a port or VLAN, it limits
the multicast group operated by the IGMP/MLD snooping function and layer 3
function. If the IPv4 or IPv6 option is not specified, IPv4 is implied.
 Format
config limited_multicast_addr [ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]}
{[add | delete] [profile_id <value 1-60> | profile_name <name 32>] | access [permit |
deny]}(1)
 Parameters
ports Specify a range of ports to configure the multicast address filtering function.
<portlist>
Specify a range of ports to be configured.
vlanid Specify the VLAN ID of the VLAN that the multicast address filtering function will be
configured on.
<vlanid_list>
Enter the VLAN ID of the VLAN that the multicast address filtering functions will be
configured on here.
ipv4 (Optional) Specify the IPv4 multicast profile.
ipv6 (Optional) Specify the IPv6 multicast profile.
add (Optional) Add a multicast address profile to a port or VLAN.
delete (Optional) Delete a multicast address profile from a port or VLAN.
profile_id(Optional) Specify a profile ID to be added to or deleted from the port or VLAN.
<value 1-60>
The profile ID must be between 1 and 60.
34. Limited Multicast IP Address Commands
Multicast Addresses
234.1.1.1 - 238.244.244.244
234.1.1.1 - 238.244.244.244
224.19.62.34 - 224.19.162.200
291