Panasonic ZEQUO 2200 Operating Instructions Manual page 289

 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To add the IPv6 multicast address range FF0E::100:0:0:20 - FF0E::100:0:0:22 to profile
ID 3:
Zxxx0:admin#config mcast_filter_profile ipv6 profile_id 3 add FF0E::100:0:0:20 -
FF0E::100:0:0:22
Command: config mcast_filter_profile ipv6 profile_id 3 add FF0E::100:0:0:20 -
FF0E::100:0:0:22
Success.
Zxxx0:admin#
34.4. delete mcast_filter_profile
 Description
This command is used to delete a multicast address profile. If the IPv4 or IPv6 option is
not specified, IPv4 is implied.
 Format
delete mcast_filter_profile {[ipv4 | ipv6]} [profile_id [<value 1-60> | all] | profile_name
<name 32>]
 Parameters
ipv4 (Optional) Specify to delete an IPv4 multicast profile.
ipv6 (Optional) Specify to delete an IPv6 multicast profile.
profile_idSpecify the ID of the profile. The range is from 1 to 60.
<value 1-60>
The profile ID must be between 1 and 60.
all All multicast address profiles will be deleted.
profile_name
Specify a profile based on the profile name.
<name 32>
The profile name can be up to 32 characters long.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To delete a multicast profile with a profile ID of 3:
34. Limited Multicast IP Address Commands
289