Panasonic ZEQUO 2200 Operating Instructions Manual page 337

38.3. config mac_notification
 Description
This command is used to configure the Switching Hub's MAC address table
notification global settings.
 Format
config mac_notification {interval <int 1-2147483647> | historysize <int 1-500>}(1)
 Parameters
interval Specify the time interval in seconds to trigger the notification.
<int 1-2147483647>
Specify between 1 second and 2147483647 seconds.
historysize
Specify the entries of new learned MAC to trigger the notification.
<int 1-500>
Specify up to 500 entries.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To configure the Switching Hub's MAC address table notification global settings:
Zxxx0:admin#config mac_notification interval 1 historysize 500
Command: config mac_notification interval 1 historysize 500
Success.
Zxxx0:admin#
38.4. config mac_notification ports
 Description
This command is used to configure the port's MAC address table notification status
settings.
 Format
config mac_notification ports [<portlist> | all] [enable | disable]
38. MAC Notification Commands
337