51. Ring Redundant Protocol (RRP) Commands
Example
To display the RRP settings:
Zxxx0:admin# show rrp
Command: show rrp
RRP Status : Enabled
Total Domain Number(s) : 1
Domain Name
Ctrl VLAN
------------ ---------- --------------------------------------- -----------
pc-ring
30
Zxxx0:admin#
51.9. show rrp status
Description
This command is used to display the specific RRP domain settings.
Format
show rrp status <domain name>
Parameters
<domain name>
Specify the RRP domain name to dipslay.
Restrictions
None.
Data VLAN(s)
1
492
Ring Status
Link-Up