Config Firmware Image - Panasonic ZEQUO 2200 Operating Instructions Manual

63. Utility Commands
Zxxx0:admin#upload log_toRCP rcp: tld2@172.18.212.104/home/Zxxx0.log
Command: upload log_toRCP rcp: tld2@172.18.212.104/home/Zxxx0.log
Connecting to server................... Done.
Upload log............................. Done.
Success.
Zxxx0:admin#

63.9. config firmware image

 Description
This command is used to configure firmware as a boot-up image.
 Format
config firmware image {unit <unit_id 1-4>} <pathname> boot_up
 Parameters
unit (Optional) Specifies the unit ID used for this configuration.
<unit_id 1-4>
Enter the unit ID used for this configuration here.
<pathname>
Specify a firmware on the device file system.
boot_up Specify as boot up file.
 Restrictions
Only Administrator-level users can issue this command.
 Example
To configure a firmware file to bootup:
Zxxx0:admin#config firmware image 1.0.0.xx.rom boot_up
Command: config firmware image 1.0.0.xx.rom boot_up
Success.
Zxxx0:admin#
598