27.10. show igmp_snooping rate_limit
Description
This command is used to display the IGMP snooping rate limit setting.
Format
show igmp_snooping rate_limit [ports <portlist> | vlanid <vlanid_list>]
Parameters
ports
Specify a range of ports to be displayed.
<portlist>
Specify a range of ports to be displayed.
vlanid
Specify a range of VLANs to be displayed.
<vlanid_list>
Specify the VLAN ID list.
Restrictions
None.
Example
To display the IGMP snooping rate limit for ports 1-2:
Zxxx0:admin#show igmp_snooping rate_limit ports 1-2
Command: show igmp_snooping rate_limit ports 1-2
Port
Rate Limit
--------
------------
1
No Limit
2
No Limit
Total Entries: 2
Zxxx0:admin#
27. IGMP Snooping Commands
235