24.11. copy
Description
This command is used to copy a file to another file in the file system.
Format
copy {{unit <unit_id>} <drive_id>} <pathname> {{unit <unit_id>} <drive_id>}
<pathname>
Parameters
unit
Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.
<unit_id>
Enter the unit ID value here.
<drive_id>
Specifies the drive ID. If not specified, it refers to the current drive.
<pathname>
Specify the file to be copied. If it is specified in the associated form, then it is
related to the current directory.
unit
Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.
<unit_id>
Enter the unit ID value here.
<drive_id>
Specifies the drive ID. If not specified, it refers to the current drive.
<pathname>
Specify the file to copy to. If it is specified in the associated form, then it is related
to the current directory
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To copy a file:
Zxxx0:admin#copy c:/log.txt c:/log1.txt
Command: copy c:/log.txt c:/log1.txt
Copying............................ Done!
Zxxx0:admin#
24. File System Management Commands
207