3. Connection
3.2.
Connecting with an SFP Extension Slot
Fig. 3-2 Optical Fiber Cable Connection Example
Plugging an SFP module (optional) into an SFP extension slot enables an optical fiber
connection. By factory default, the copper cable port is enabled, but the SFP exten-
sion port is automatically enabled when a link is established.
Connect this Switching Hub's TX port to the RX port of the connected device and this
Switching Hub's RX port to the TX port of the connected device.
The following SFP modules are optionally available:
- 1000BASE-SX SFP module (Part number: PN54021K)
- 1000BASE-LX SFP module (Part number: PN54023K)
3.3.
Connecting to Power
Connect the supplied power cord to the power port of this Switching Hub, and con-
nect the power plug into an electric outlet. The Switching Hub operates at AC 100 -
240 V (50/60 Hz).
It does not have a power switch. When you connect the power plug, the Switching
Hub turns on and starts operating. To power off, unplug the power plug from the
electric outlet.
18