67. 802.1X Commands
Parameters
<portlist>
Specify a range of ports to be configured.
all
Specify all ports.
enable
Enable the 802.1X PDU forwarding state.
disable
Disable the 802.1X PDU forwarding state.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the 802.1X PDU forwarding state on ports 1 to 2:
Zxxx0:admin#config 802.1x fwd_pdu ports 1-2 enable
Command: config 802.1x fwd_pdu ports 1-2 enable
Success.
Zxxx0:admin#
67.10. config 802.1x fwd_pdu system
Description
This command is used to configure the 802.1X PDU forwarding state.
Format
config 802.1x fwd_pdu system [enable | disable]
Parameters
enable
Enable the 802.1X PDU forwarding state.
disable
Disable the 802.1X PDU forwarding state.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the 802.1X PDU forwarding state:
658