Config Accounting Service - Panasonic ZEQUO 2200 Operating Instructions Manual

radiusAuthServerEntry ==>
radiusAccServerIndex : 3
radiusAccServerAddress
radiusAccClientServerPortNumber
radiusAccClientRoundTripTime
radiusAccClientRequests
radiusAccClientRetransmissions
radiusAccClientResponses
radiusAccClientMalformedResponses
radiusAccClientBadAuthenticators
radiusAccClientPendingRequests
radiusAccClientTimeouts
radiusAccClientUnknownTypes
radiusAccClientPacketsDropped
Zxxx0:admin#

67.29. config accounting service

 Description
This command is used to configure the state of the specified RADIUS accounting
service.
 Format
config accounting service [network | shell | system] state [enable | disable]
 Parameters
network Specify the accounting service for 802.1X port access control. By default, the service is
disabled.
shell Specify the accounting service for shell events. When a user logins or logouts of the
Switching Hub (via the console, Telnet, or SSH) and when timeout occurs, accounting
information will be collected and sent to the RADIUS server. By default, the service is
disabled.
system Specify the accounting service for system events: reset and reboot. By default, the service
is disabled.
state Specify the state of the accounting service.
enable
Enable the specified accounting service.
disable
Disable the specified accounting service.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
0.0.0.0
X
0
0
0
0
0
0
0
0
0
0
679
67. 802.1X Commands