Panasonic ZEQUO 2200 Operating Instructions Manual page 125

16.2. config authentication mac_format
 Description
This command is used to configure the MAC address format of the RADIUS authentication
user name for MAC-based Access Control.
 Format
config authentication mac_format {case [lowercase | uppercase] | delimiter {[hyphen |
colon | dot | none] | number [1 | 2 | 5]}(1)}(1)
 Parameters
case (Optional) Specify the leter format.
lowercase
User lowercase letters, e.g. aabbccddeeff.
uppercase
Use uppercase letters, e.g. AABBCCDDEEFF.
delimiter(Optional)Specify whether to use delimiter and number of delimiters for MAC address.
hyphen
(Optional) Use "-" when specifying MAC address, e.g. aa-bb-cc-dd-ee-ff.
colon
(Optional) Use ":" when specifying MAC address, e.g. aa:bb:cc:dd:ee:ff.
dot
(Optional) Use "."when specifying MAC address, e.g. aa.bb.cc.dd.ee.ff.
none
(Optional) Do not use any delimiter when specifying MAC address, e.g.
aabbccddeeff.
number
(Optional) Specify the number of delimiters.
1 Use one delimiter, e.g. aabbcc-ddeeff.
2 Use two delimiters, e.g. aabb-ccdd-eeff.
5 Use five delimiters, e.g. aa-bb-cc-dd-ee-ff.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the MAC address format to IEFT style:
Zxxx0:admin# config authentication mac_format case uppercase delimiter hyphen
number 5
Command: config authentication mac_format case uppercase delimiter hyphen number 5
Success.
Zxxx0:admin#
16. Network Access Authentication Command List
125