Panasonic ZEQUO 2200 Operating Instructions Manual page 213

25.3. config filter extensive_netbios
 Description
This command is used to configure the Switching Hub to deny NetBIOS packets over
802.3 frames on the network. Enabling the filterNetBIOS packets over 802.3 frames
will create one access profile and one access rule per port automatically. Filter
commands in this file will share the same access profile.
 Format
config filter extensive_netbios [<portlist> | all] state [enable | disable]
 Parameters
<portlist>Specify a range of ports to be configured.
all Specify to configure all ports.
state Specify the status of the filter to block the NetBIOS packets over 802.3 frames.
enable
Enable the filter to block the NetBIOS packets over 802.3 frames.
disable
Disable the filter to block the NetBIOS packets over 802.3 frames.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the extensive NetBIOS filter state on ports 1 to 10:
Zxxx0:admin#config filter extensive_netbios 1-10 state enable
Command: config filter extensive_netbios 1-10 state enable
Success.
Zxxx0:admin#
25.4. show filter extensive_netbios
 Description
This command is used to display the extensive NetBIOS filter state on the Switching
Hub.
 Format
show filter extensive_netbios
213
25. Filter Commands