Table of Contents
Advertisement
65. VLAN Commands
65.6. config vlan vlanid
Description
This command is used to add or delete ports to the port list of a previously configured
VLAN. Users can specify the additional ports as tagged, untagged, or forbidden.
Format
config vlan vlanid <vidlist> {[add [tagged | untagged | forbidden] | delete] <portlist> |
advertisement [enable | disable] | name <vlan_name 32>}(1)
Parameters
<vidlist> Specify the VLAN ID of the VLAN to add or delete ports to.
add
Specify the port attribute to add.
tagged
Specify the additional ports as tagged.
untagged
Specify the additional ports as untagged.
forbidden
Specify the ports to be forbidden from becoming members of the VLAN
dynamically and not able to forward packets in this VLAN.
delete
Specify the port status to delete.
<portlist>Specify a range of ports to add or delete to the VLAN.
advertisement
Specify to send GVRP out for this VLAN or not. If not, the VLAN cannot be joint
dynamically.
enable
Specify to enable GVRP.
disable
Specify to disable GVRP.
name
Specify the VLAN name.
<vlan_name 32>
The maximum length is 32 characters.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add 4 through 8 as tagged ports to the VLAN 1:
Zxxx0:admin#config vlan vlanid 1 add tagged 4-8
Command: config vlan vlanid 1 add tagged 4-8
Success.
Zxxx0:admin#
630
Advertisement
Table of Contents
