Web-Based Access Control (Wac) Commands - Panasonic ZEQUO 2200 Operating Instructions Manual

68.Web-based Access Control (WAC)
Commands
WAC (Web-based Access Control, Web-based authentication) is a
terminal authentication method using a PC web browser.
It uses the HTTP or HTTPS protocol to perform an authentication
process through a local database in this Switching Hub or an external
RADIUS server as the authentication server.
enable wac
disable wac
config wac authorization attributes {radius [enable | disable] | local [enable | disable]}(1)
config wac ports [<portlist> | all] {state [enable | disable] | aging_time [infinite | <min 1-1440>] |
idle_time [infinite | <min 1-1440>] | block_time [<sec 0-300>]}(1)
config wac method [local | radius]
config wac default_redirpath <string 128>
config wac clear_default_redirpath
config wac virtual_ip {<ipaddr>}
config wac switch_http_port <tcp_port_number 1-65535>
create wac user <username 15> {[vlan <vlan_name 32> | vlanid <vlanid 1-4094>]}
delete wac [user <username 15> | all_users]
config wac user <username 15> [vlan <vlan_name 32> | vlanid <vlanid 1-4094> | clear_vlan]
show wac
show wac ports {<portlist>}
show wac user
show wac auth_state ports {<portlist>}
clear wac auth_state [ports [<portlist> | all] {authenticated | authenticating | blocked} | macaddr
<macaddr>]
config wac authentication_page element [default | page_title <desc 128> | login_window_title
<desc 64> | user_name_title <desc 32> | password_title <desc 32> | logout_window_title
<desc 64> | notification_line <value 1-5> <desc 128>]
show wac authenticate_page
68.1. enable wac
 Description
This command is used to enable the WAC function.
 Format
enable wac

68. Web-based Access Control (WAC) Commands

681