To exclude the protocol identity TLV from the outbound LLDP advertisements for all
ports:
Zxxx0:admin#config lldp ports all dot1_tlv_protocol_identity all enable
Command: config lldp ports all dot1_tlv_protocol_identity all enable
Success.
Zxxx0:admin#
To exclude the MAC/PHY configuration/status TLV from the outbound LLDP
advertisements for all ports:
Zxxx0:admin#config lldp ports all dot3_tlvs mac_phy_configuration_status enable
Command: config lldp ports all dot3_tlvs mac_phy_configuration_status enable
Success.
Zxxx0:admin#
36.8. show lldp ports
Description
This command is used to display LLDP per port configuration for advertisement
options.
Format
show lldp ports {<portlist>}
Parameters
<portlist>(Optional) Specify the ports to be displayed.
When a port list is not specified, information for all ports will be
displayed.
Restrictions
None.
315
36. LLDP Commands