Example
To display the configuration of the current terminal width:
Zxxx0:admin#show terminal width
Command: show terminal width
Global terminal width
Current terminal width
Zxxx0:admin#
5.26. show device_status
Description
This command displays current status of power(s) and fan(s) on the system.
Within fan(s) status display, for example, there are three fans on the left of the
Switching Hub, if three fans is working normally, there will display "OK" in the Left Fan
field. If some fans work failed, such as fan 1,3 , there will only display the failed fans in
the Left Fan field, such as "1,3 Fail".
In the same way, the Right Fan, Back Fan is same to Left Fan. Because there is only
one CPU Fan, if it is working failed, display "Fail", otherwise display "OK".
Format
show device_status
Parameters
None.
Restrictions
None.
Example
To show device status:
Zxxx0:admin# show device_status
Command: show device_status
Unit 1:
Internal Power: Active
Right Fan
: Fail
Zxxx0:admin#
: 80
: 80
49
5. Basic Management Commands