Panasonic ZEQUO 2200 Operating Instructions Manual page 670

67. 802.1X Commands
auth_port
Specify the UDP port number which is used to transmit RADIUS authentication data
between the Switching Hub and the RADIUS server. The default is 1812.
<udp_port_number 1-65535>
The authentication port value must be between 1 and 65535.
default
Specify to use the default value.
acct_port
Specify the UDP port number which is used to transmit RADIUS authentication data
between the Switching Hub and the RADIUS server. The default is 1812.
<udp_port_number 1-65535>
The authentication port value must be between 1 and 65535.
default
Specify to use the default value.
timeout Specify the time in seconds for waiting for a server reply. The default value is 5 seconds.
<int 1-255>
Specify the time in seconds for waiting for a server reply. The timeout value must
be between 1 and 255. The default value is 5 seconds.
default
Specify to use the default value.
retransmit
Specify the count for re-transmission. The default value is 2.
<int 1-20>
The re-transmit value must be between 1 and 20.
default
Specify to use the default value.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure a RADIUS server:
Zxxx0:admin#config radius 1 ipaddress 10.48.74.121 key manager
Command: config radius 1 ipaddress 10.48.74.121 key manager
Success.
Zxxx0:admin#
670