Show Stp; Show Stp Instance - Panasonic ZEQUO 2200 Operating Instructions Manual

54.1. show stp

 Description
This command is used to display the bridge parameters global settings.
 Format
show stp
 Parameters
None.
 Restrictions
None.
 Example
To display STP:
Zxxx0:admin#show stp
Command: show stp
STP Bridge Global Settings
-----------------------------
STP Status
STP Version
Max Age
Forward Delay
Max Hops
TX Hold Count
Forwarding BPDU
NNI BPDU Address
Zxxx0:admin#

54.2. show stp instance

 Description
This command is used to display each instance parameters settings. Value means the
instance ID, if there is no input of this value, all instances will be shown.
 Format
show stp instance {<value 0-64>}
: Enabled
: MSTP
: 20
: 15
: 20
: 6
: Enabled
: dot1d
54. Spanning Tree Protocol (STP) commands
527