67. 802.1X Commands
67.18. config 802.1x guest_vlan ports
Description
This command is used to configure a guest VLAN setting.
Format
config 802.1x guest_vlan ports [<portlist> | all] state [enable | disable]
Parameters
<portlist>Specify a range of ports to be configured.
all
Specify to configure all ports.
state
Specify the guest VLAN port state of the configured ports.
enable
Join the guest VLAN.
disable
Remove from guest VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure a guest VLAN setting for ports 1 to 8:
Zxxx0:admin# config 802.1x guest_vlan ports 1-8 state enable
Command: config 802.1x guest_vlan ports 1-8 state enable
Warning, The ports are moved to Guest VLAN.
Success.
Zxxx0:admin#
67.19. show 802.1x guest_vlan
Description
This command is used to display guest VLAN information.
Format
show 802.1x guest_vlan
666