68. Web-based Access Control (WAC) Commands
68.16. show wac auth_state ports
Description
This command is used to display the authentication state for ports.
Format
show wac auth_state ports {<portlist>}
Parameters
<portlist>(Optional) Specify the list of ports whose WAC authentication state will be displayed.
Restrictions
None.
Example
To display the WAC authentication status of ports:
Zxxx0:admin# show wac auth_state ports
Command: show wac auth_state ports
P:Port-based
Pri:Priority
Port
MAC Address
------ -------------------- ---- -------------- ---- -- ----------- ----
31
00-05-5D-F9-16-76
Total Authenticating Hosts
Total Authenticated Hosts
Total Blocked Hosts
Zxxx0:admin#
68.17. clear wac auth_state
Description
This command is used to clear the authentication state of a port. The port will return
to un-authenticated state. All the timers associated with the port will be reset.
Format
clear wac auth_state [ports [<portlist> | all] {authenticated | authenticating |
blocked} | macaddr <macaddr>]
Original
State
RX VID
1
Authenticating -
: 1
: 0
: 0
694
VID Pri Aging Time/ Idle
Block Time
-
27
Time
-