Panasonic ZEQUO 2200 Operating Instructions Manual page 61

ip Specify an IP access control list rule.
vlan Specify the VLAN name.
<vlan_name 32>
Specify the VLAN name. The maximum length is 32 characters.
vlanid
Specify the VLAN ID.
<vlanid 1-4094>
Specify the VLAN ID between 1 and 4094.
mask
(Optional) Specify the mask.
<hex 0x0-0x0fff>
source_ip
Specify an IP source address.
<ipaddr>
Specify an IP source address.
mask (Optional) Specify the mask.
<netmask>
destination_ip
Specify an IP destination address.
<ipaddr>
Specify an IP destination address.
mask (Optional) Specify the mask.
<netmask>
dscp Specify the value of DSCP.
<value 0-63>
Specify the value of DSCP. The DSCP value ranges from 0 to 63.
icmp Specify the ICMP.
type
(Optional) Specify that the rule will apply to the ICMP Type traffic value.
<value 0-255>
code (Optional) Specify that the rule will apply to the ICMP Code traffic value.
<value 0-255>
igmp Specify the IGMP.
type (Optional) Specify that the rule will apply to the IGMP Type traffic value.
<value 0-255>
tcp Specify TCP.
Specify the mask.
Specify the mask.
Specify the mask.
Specify the value between 0 and 255.
Specify the value between 0 and 255.
Specify the value between 0 and 255.
61
6. Access Control List (ACL) Commands