Panasonic ZEQUO 2200 Operating Instructions Manual page 712

69. System Log Lists
69.19. MSTP Debug Enhancement
# Serverity
1 Notice
2 Informational
3 Informational
4 Informational
5 Notice
6 Notice
7 Informational
8 Informational
9 Informational
10 Informational
11 Informational
12 Informational
Log message / Explanation
Topology changed [( [Instance:<InstanceID> ] ,port:<[unitID:]
portNum> ,MAC: <macaddr>)]
Topology changed.
[CIST | CIST Regional | MSTI Regional] New Root bridge
selected( [Instance: <InstanceID> ]MAC: <macaddr> Priority
:<value>)
A new Root Bridge is selected.
Spanning Tree Protocol is enabled
STP is enabled.
Spanning Tree Protocol is disabled
STP is disabled.
New root port selected [( [Instance:<InstanceID> ],
port:<[unitID:] portNum>)]
A new Root Port is selected.
Spanning Tree port status changed [( [Instance:<InstanceID> ],
port:<[unitID:] portNum>)] <old_status> -> <new_status>
STP port status is changed.
Spanning Tree port status changed. [( [Instance:<InstanceID>
], port:<[unitID:] portNum>)] <old_role> -> <new_role>
STP port role is changed.
Spanning Tree instance created. Instance:<InstanceID>
STP instance is created.
Spanning Tree instance deleted. Instance:<InstanceID>
STP instance is deleted.
Spanning Tree version changed. New version:<new_version>
STP version is changed.
Spanning Tree MST configuration ID name and revision level
changed (name:<name> ,revision level <revision_level>).
MST Configuration ID name and revision level are changed.
Spanning Tree MST configuration ID VLAN mapping table
changed (instance: <InstanceID> delete vlan <startvlanid> [-
<endvlanid>]).
MST configuration ID VLAN mapping table is deleted.
712