Panasonic ZEQUO 2200 Operating Instructions Manual page 651

show 802.1x guest_vlan
config radius add <server_index 1-3> [<server_ip> | <ipv6addr>] key <password 32> [default |
{auth_port <udp_port_number 1-65535> | acct_port <udp_port_number 1-65535> | timeout
<sec 1-255> | retransmit <int 1-20>}(1)]
config radius delete <server_index 1-3>
config radius <server_index 1-3> {ipaddress [<server_ip> | <ipv6addr>] | key <password 32> |
auth_port [<udp_port_number 1-65535> | default] | acct_port [<udp_port_number 1-
65535> | default] | timeout [<sec 1-255> | default] | retransmit [<int 1-20> | default]}(1)
show radius
show auth_statistics {ports <portlist>}
show auth_diagnostics {ports <portlist>}
show auth_session_statistics {ports <portlist>}
show auth_client
show acct_client
config accounting service [network | shell | system] state [enable | disable]
show accounting service
67.1. enable 802.1x
 Description
This command is used to enable the 802.1X function.
 Format
enable 802.1x
 Parameters
None.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To enable the 802.1X function:
Zxxx0:admin#enable 802.1x
Command: enable 802.1x
Success.
Zxxx0:admin#
651
67. 802.1X Commands