Config Rmon Trap - Panasonic ZEQUO 2200 Operating Instructions Manual

44. Network Management Commands

44.22. config rmon trap

 Description
This command is used to configure the trap state for RMON events.
 Format
config rmon trap {rising_alarm [enable | disable] | falling_alarm [enable | disable]}
 Parameters
rising_alarm
(Optional) Specify the trap state for rising alarm. The default state is enabled.
enable
Enable the trap state for rising alarm.
disable
Disable the trap state for rising alarm.
falling_alarm
(Optional) Specify the trap state for falling alarm. The default state is enabled.
enable
Enable the trap state for falling alarm.
disable
Disable the trap state for falling alarm.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To disable the trap state for RMON:
Zxxx0:admin#config rmon trap rising_alarm disable
Command: config rmon trap rising_alarm disable
Success.
Zxxx0:admin#
412