Config Ssh Authmode; Show Ssh Authmode - Panasonic ZEQUO 2200 Operating Instructions Manual

55. SSH Commands

55.3. config ssh authmode

 Description
This command is used to update the user authentication for SSH configuration.
 Format
config ssh authmode [password | publickey | hostbased] [enable | disable]
 Parameters
password
Specify the user authentication method.
publickey
Specify the user authentication method.
hostbased
Specify the user authentication method.
enable Specify to enable the user authentication method.
disable Specify to disable the user authentication method.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the SSH user authentication method:
Zxxx0:admin#config ssh authmode publickey enable
Command: config ssh authmode publickey enable
Success.
Zxxx0:admin#

55.4. show ssh authmode

 Description
This command is used to display the user authentication methods.
 Format
show ssh authmode
544