Create Snmp - Panasonic ZEQUO 2200 Operating Instructions Manual

53. SNMPv1/v2/v3 Commands
 Parameters
<groupname 32>
Specify the name of the group that will be deleted.
 Restrictions
Only Administrator-level users can issue this command.
 Example
To remove an SNMP group:
Zxxx0:admin#delete snmp group MANAGER_group
Command: delete snmp group MANAGER_group
Success.
Zxxx0:admin#

53.16. create snmp

 Description
This command is used to create a recipient of an SNMP operation.
 Format
create snmp [host <ipaddr> | v6host <ipv6addr>] [v1 | v2c | v3 [noauth_nopriv |
auth_nopriv | auth_priv] ] <auth_string 32>
 Parameters
host Specify the IP address of the recipient for which the traps are targeted.
<ipaddr>
Specify the IP address of the recipient for which the traps are targeted.
v6host Specify the v6host IP address to which the trap packet will be sent.
<ipv6addr>
Specify the v6host IP address to which the trap packet will be sent.
v1 Specify the least secure of the possible security models.
v2c Specify the second least secure of the possible security models.
v3 Specify the most secure of the possible security models.
noauth_nopriv
Specify to neither support packet authentication nor encrypting.
auth_nopriv
Specify to support packet authentication.
auth_priv
Specify to support packet authentication and encrypting.
516