Table of Contents
Advertisement
begin
(Optional) The first line that contains the specified filter string will be the first line of the
output.
<filter_string 80>
Specify a filter string enclosed by the quotation mark symbol. Thus, the filter string
itself cannot contain the quotation mark character. The filter string is case sensitive.
<filter_string 80>
Specify a filter string enclosed by the quotation mark symbol.
<filter_string 80>
Specify a filter string enclosed by the quotation mark symbol.
log_toTFTP
Used to upload a log file from the device to a TFTP server.
<ipaddr>
Specify the IP address of the TFTP server.
<ipv6addr>
Specify the IPv6 address of the TFTP server.
<domain_name 255>
Enter the domain name of the TFTP server here. This name can be up to 255
characters long.
dest_file Specify the path name if the TFTP server.
<path_filename 64>
Specify the path name on the TFTP server. It can be a relative path name or an
absolute path name
attack_log_toTFTP
Used to upload the attack log to a TFTP server.
<ipaddr>
Specify the IP address of the TFTP server.
<ipv6addr>
Specify the IPv6 address of the TFTP server.
<domain_name 255>
Enter the domain name of the TFTP server here. This name can be up to 255
characters long.
dest_file Specify the path name if the TFTP server.
<path_filename 64>
Specify the path name on the TFTP server. It can be a relative path name or an
absolute path name
unit
(Optional) Specifies which unit on the stacking system. If it is not specified, it refers to the
master unit.
<unit_id 1-4>
Enter the unit ID used here.
firmware_toTFTP
Used to upload firmware from the device to a TFTP server.
<ipaddr>
Specify the IP address of the TFTP server.
<ipv6addr>
Specify the IPv6 address of the TFTP server.
<domain_name 255>
Enter the domain name of the TFTP server here. This name can be up to 255
characters long.
dest_file Specify the path name if the TFTP server.
<path_filename 64>
Specify the path name if the TFTP server.
591
63. Utility Commands
Advertisement
Table of Contents
