36. LLDP Commands
Example
To display LLDP local port information for port 1:
Zxxx0:admin#show lldp local_ports
Command: show lldp local_ports 1
Port ID : 1
-----------------------------------------------------------------------------
Port ID Subtype
Port ID
Port Description
Port PVID
Management Address Count
PPVID Entries Count
VLAN Name Entries Count
Protocol Identity Entries Count
MAC/PHY Configuration/Status
Link Aggregation
Maximum Frame Size
Zxxx0:admin#
36.18. show lldp mgt_addr
Description
This command is used to display the LLDP management address.
Format
show lldp mgmt_addr {[ipv4 <ipaddr> | ipv6 <ipv6addr>]}
Parameters
ipv4
(Optional) Specify the IPv4 address of the LLDP managament address entry.
<ipaddr>
Specify the IPv4 address of the LLDP managament address entry.
ipv6
(Optional) Specify the IPv6 address of the LLDP managament address entry.
<ipv6addr> Specify the IPv6 address of the LLDP managament address entry.
Restrictions
None.
1
: MAC Address
: 00-01-02-03-05-00
: Zxxx0 R1.0.0.xx
Port 1 on Unit 1
: 1
: 1
: 0
: 1
: 0
: (See Detail)
: (See Detail)
: 1536
326