18.12. debug stp state
Description
This command is used to enable or disable the STP debug state.
Format
debug stp state [enable | disable]
Parameters
state
Specifies the STP debug state.
enable
Enable the STP debug state.
disable
Disable the STP debug state.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the STP debug state to enable, and then disable the STP debug state:
Zxxx0:admin# debug stp state enable
Command: debug stp state enable
Success.
Zxxx0:admin# debug stp state disable
Command: debug stp state disable
Success.
Zxxx0:admin#
18.13. debug show status
Description
Show the debug handler state and the specified module's debug status.
If the input module list is empty, the states of all registered modules which support debug
module will be shown.
Format
debug show status {module <module_list>}
18. Debug Software Command List
163