Example
To configure the range of time to activate a function on the Switching Hub:
Zxxx0:admin#config time_range testdaily hours start_time 12:0:0 end_time 13:0:0
weekdays mon,fri
Command: config time_range testdaily hours start_time 12:0:0 end_time 13:0:0
weekdays mon,fri
Success.
Zxxx0:admin#
6.6.
show time_range
Description
This command is used to display current time range settings.
Format
show time_range
Parameters
None.
Restrictions
None.
Example
To display current time range setting:
Zxxx0:admin#show time_range
Command: show time_range
Time Range Information
-------------------------
Range Name
:
testdaily
Weekdays
:
Mon,Fri
Start Time
:
12:00:00
End Time
:
13:00:00
Total Entries :1
Zxxx0:admin#
6. Access Control List (ACL) Commands
71