5. Basic Management Commands
5.17. disable telnet
Description
This command is used to disable Telnet.
Format
disable telnet
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable Telnet:
Zxxx0:admin#disable telnet
Command: disable telnet
Success.
Zxxx0:admin#
5.18. save
Description
This command is used to save the current configuration or log in non-volatile RAM.
Format
save {[config <pathname> | log | all]}
Parameters
config
(Optional) Specify to save configuration.
<pathname>
Specify the path name of the indicated configuration
log
(Optional) Specify to save log.
all
(Optional) Specify to save changes to currently active configuration and save logs.
42