Panasonic ZEQUO 2200 Operating Instructions Manual page 358

39. MAC-based Access Control Commands
 Parameters
state Specifies the log state for MAC-based Access Control.
enable
Specifies that the log for MAC-based Access Control will be enabled.
disable
Specifies that the log for MAC-based Access Control will be disabled.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To disable the log state for MAC-based Access Control:
Zxxx0:admin# config mac_based_access_control log state disable
Command: config mac_based_access_control log state disable
Success.
Zxxx0:admin#
39.19. config mac_based_access_control trap
state
 Description
This command is used to enable or disable the sending of MAC-based Access Control
traps.
 Format
config mac_based_access_control trap state [enable | disable]
 Parameters
state Specifies the trap state for MAC-based Access Control.
enable
Specifies that the trap state for MAC-based Access Control will be enabled.
disable
Specifies that the trap state for MAC-based Access Control will be disabled.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
358