Table of Contents
Advertisement
ip
Specify an IP access control list rule.
vlan Specify a VLAN mask. Only the last 12 bits of the mask will be considered.
<hex 0x0-0x0fff> - (Optional) Specify a VLAN mask.
source_ip_mask
Specify an IP source submask.
<netmask>
Specify an IP source submask.
destination_ip_mask
Specify an IP destination submask.
<netmask>
Specify an IP destination submask.
dscp Specify the DSCP mask.
icmp Specify that the rule applies to ICMP traffic.
type (Optional) Specify the ICMP packet type.
code (Optional) Specify the ICMP code.
igmp Specify that the rule applies to IGMP traffic.
type (Optional) Specify the IGMP packet type.
tcp
Specify that the rule applies to TCP traffic.
src_port_mask
(Optional) Specify the TCP source port mask.
<hex 0x0-0xffff>
Specify the TCP source port mask.
dst_port_mask
(Optional) Specify the TCP destination port mask.
<hex 0x0-0xffff>
Specify the TCP destination port mask.
flag_mask
(Optional) Specify the TCP flag field mask.
all
Specify to check all paramenters below.
urg
(Optional) Specify Urgent Pointer field significant.
ack
(Optional) Specify Acknowledgment field significant.
psh
(Optional) Specify Push Function.
rst
(Optional) Specify to reset the connection.
syn
(Optional) Specify to synchronize sequence numbers.
fin
(Optional) No more data from sender.
udp
Specify that the rule applies to UDP traffic.
src_port_mask
(Optional) Specify the TCP source port mask.
<hex 0x0-0xffff>
dst_port_mask
(Optional) Specify the TCP destination port mask.
<hex 0x0-0xffff>
protocol_id_mask
Specify that the rule applies to the IP protocol ID traffic.
<hex 0x0-0xff>
Specify that the rule applies to the IP protocol ID traffic.
user_define_mask
(Optional) Specify the L4 part mask.
<hex 0x0-0xffffffff>
Specify the L4 part mask.
Specify the TCP source port mask.
Specify the TCP destination port mask.
55
6. Access Control List (ACL) Commands
Advertisement
Table of Contents
