37. Loopback Interface Commands
37.4. delete loopback ipif
Description
This command is used to delete a loopback interface.
Format
delete loopback ipif [<ipif_name 12> | all]
Parameters
<ipif_name 12>
Enter the IP interface name used for this configuration here. This name can be up to 12
characters long.
all
Specifies that all the IP loopback interfaces will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete the loopback interface named loopback1:
Zxxx0:admin# delete loopback ipif loopback1
Command: delete loopback ipif loopback1
Success.
Zxxx0:admin#
334