Panasonic ZEQUO 2200 Operating Instructions Manual page 560

57. Subnet VLAN Commands
57.4. config vlan_precedence ports
 Description
This command is used to configure vlan classification precedence on each port.
You can specify the order of MAC-based VLAN classification and subnet VLAN
classification.
If a port's VLAN classification is MAC-based precedence, MAC-based VLAN
classification will process at first. If MAC-based VLAN classification fails, the subnet
VLAN classification will be executed.
If a port's VLAN classification is subnet VLAN precedence, the subnet VLAN
classification will process at first. If subnet VLAN classification fails, the MAC-based
VLAN classification will be executed.
 Format
config vlan_precedence ports <portlist> [mac_based_vlan | subnet_vlan]
 Parameters
<portlist>Enter a list of ports used for this configuration here.
mac_based_vlan
Specifies that the MAC-based VLAN classification is precedence than subnet VLAN
classification
subnet_vlan
Specifies that the subnet VLAN classification is precedence than MAC-based VLAN
classification
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure subnet VLAN classification precedence on port 1:
Zxxx0:admin# config vlan_precedence ports 1 subnet_vlan
Command: config vlan_precedence ports 1 subnet_vlan
Success.
Zxxx0:admin#
560