Panasonic ZEQUO 2200 Operating Instructions Manual page 512

53. SNMPv1/v2/v3 Commands
If a community string is not specified, all community string information
will be displayed.
 Restrictions
None.
 Example
To display the current community string configurations:
Zxxx0:admin#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
----------------------------
private
public
Total Entries : 2
Zxxx0:admin#
53.11. create snmp community_masking view
 Description
This command is used to choose a security method for creating an SNMP community
string, but the community string encrypted or not depends on the SNMP community
encryption state.
If users use this command to create an SNMP community string, the community string
that the user inputs will be displayed as "*", and the user will have to double input
(confirm) the SNMP community string when creating an SNMP community.
 Format
create snmp community_masking view <view_name 32> [read_only | read_write]
 Parameters
<view_name 32>
Enter the MIB view name used here. This name can be up to 32 characters long.
read_only
Specifies that the user, using the community string, will have read only access to the
Switching Hub's SNMP agent.
read_write
Specifies that the user, using the community string, will have read/write access to the
Switching Hub's SNMP agent.
View Name
------------------------
CommunityView
CommunityView
512
Access Right
------------
read_write
read_only