Panasonic ZEQUO 2200 Operating Instructions Manual page 72

6. Access Control List (ACL) Commands
6.7. show current_config access_profile
 Description
This command is used to display the ACL part of the current configuration, when
logged in with user level privileges. The overall current configuration can be displayed
by using the show config command, which is accessible with administrator level
privileges.
 Format
show current_config access_profile
 Parameters
None.
 Restrictions
None.
 Example
To display the ACL part of the current configuration:
Zxxx0:admin#show current_config access_profile
Command: show current_config access_profile
#-----------------------------------------------------------------------------
# ACL
create access_profile Ethernet vlan profile_id 1
config access_profile profile_id 1 add access_id 1 ethernet vlan default port 1
permit
create access_profile ip source_ip_mask 255.255.255 profile_id 2
config access_profile profile_id 2 add access_id 1 ip source_ip 10.10.10.10 port 2
deny
#------------------------------------------------------------------------------
Zxxx0:admin#
72