Delete Ipif - Panasonic ZEQUO 2200 Operating Instructions Manual

10. Basic IP Commands
dhcpv6_client
Specifies the DHCPv6 client state.
enable
Enable the DHCPv6 client.
disable
Disable the DHCPv6 client.
ipv4 state The state of the IPv4 interface.
enable
Enable the IPv4 state of the IP interface.
disable
Disable the IPv4 state of the IP interface.
ip_directed_broadcast
Specifies the IP directed-broadcast state of the interface.
enable
Specifies that the IP directed-broadcast state of the interface will be enabled.
disable
Specifies that the IP directed-broadcast state of the interface will be disabled.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the System IP interface:
Zxxx0:admin#config ipif System vlan v1
Command: config ipif System vlan v1
Success.
Zxxx0:admin#

10.2. delete ipif

 Description
This command is used to delete IPv6 address.
 Format
delete ipif <ipif_name 12> ipv6address <ipv6networkaddr>
96