Debug Stp Clear Counter - Panasonic ZEQUO 2200 Operating Instructions Manual

debug show error_reboot state
 Parameters
None.
 Restrictions
Only Administrator-level users can issue this command.
 Example
To show the error reboot status:
Zxxx0:admin#debug show error_reboot state
Command: debug show error_reboot state
Error Reboot: Enabled
Zxxx0:admin#

18.7. debug stp clear counter

 Description
This command used to clear the STP counters.
 Format
debug stp clear counter {ports [<portlist> | all]}
 Parameters
ports Specifies the port range.
<portlist>
Enter the list of port used for this configuration here.
all Clears all port counters.
 Restrictions
Only Administrator-level users can issue this command.
 Example
To clear all STP counters on the Switching Hub:
18. Debug Software Command List
157